B
Balancers
Proper water chemistry helps keep pool water clean, clear and safe for bathers. Testing regularly and maintaining key levels within their proper range helps save pool owners time, money and frustration while maximizing their sanitizer efficiency.
Alkalinity Increaser
- Low total alkalinity may result in corrosion and pH bounce.
- Alkalinity Increaser raises Total Alkalinity and buffers the water against changes in pH.
- Total alkalinity should be maintained between 100 ppm and 150 ppm.
- Minor affect on pH.
- 1.5 pounds of Alkalinity Increaser per 10,000 gallons of water will raise alkalinity 10 ppm.
- ALKALINITY INCREASER is available in 25 & 5 Lb. pails
Calcium Hardness Increaser
- Low water hardness could stain or etch the pool surface and corrode equipment.
- Calcium Hardness Increaser raises water hardness level.
- Prevents foaming and equipment corrosion.
- 6 pounds of Calcium Hardness Increaser per 10,000 gallons of water will raise calcium hardness level by 50 ppm.
- CALCIUM HARDNESS INCREASER is available in 25 & 4 Lb. pails
Chlorine Stabilizer
- Low water hardness could stain or etch the pool surface and corrode equipment.
- Calcium Hardness Increaser raises water hardness level.
- Prevents foaming and equipment corrosion.
- 6 pounds of Calcium Hardness Increaser per 10,000 gallons of water will raise calcium hardness level by 50 ppm.
- CALCIUM HARDNESS INCREASER is available in 25 & 4 Lb. pails
pH Plus
- Low pH (below 7.0) can cause surface corrosion and plaster etching.
- pH PLUS raises the pH of pool water efficiently and economically.
- Fast dissolving, granular soda ash.
- pH PLUS is available in 5 Lb. pails
pH Minus
- High pH (above 7.8) causes scaling, calcium deposition and cloudy water.
- Fast dissolving granular pool acid lowers the pH and alkalinity of pool water.
- Safer to handle than muriatic acid.
- 2.5 lbs. of pH MINUS is equivalent to 1 quart of muriatic acid
- pH MINUS is available in 6 Lb. pails